Out of the box operation

Polaron’s new IGBT dimmer pack provides the optimum dimming output for electronic LV transformers. Each rack can control up to
4 x 5Amp lighting circuits and in addition, features 1-10Vdc dimming on each channel. Also included is a multiple event timer, direct alarm inputs and the ability to seamlessly integrate with AV systems.

An RS232 port is provided for easy system configuration and third party control. The pack also incorporates a fail-safe alarm input, which sends all lights to full when selected. The on-board multiple event timer allows up to 200 system-wide events to be stored.

The pack comes complete with a ten button remote control plate with two choices of fascia
finish and an infra-red sceneset/select transmitter.

Not suitable for wirewound transformers

FEATURES

• Dimmers use IGBT power devices to handle Incandescent, Electronic Low Voltage, Electronic Fluorescent, 1-10Vdc (Analogue) Fluorescent, Electronic Cold Cathode
• Each channel rated at 5Amps
• 250 Scene 10 year memory held in processor
• Individual fuse protection for each channel
• LightLink RS485 network connection, RS232, direct DMX input, Analogue control, volt-free contacts
• Electronic protection against microprocessor failure
• Internally protected against short circuit, incorrect load connection and over current.
• “Bypass to full” switch'
• Choice of two standard control plate finishes
• Dimming levels set using the infra-red transmitter or ‘on plate’ facility
• CE Approved

• Can be seamlessly integrated into any larger Polaron system
• Can be controlled by any of Polaron’s wide range of remote control plates/finishes
• Can accept a DMX(in) control signal

ORDER CODES

MSD/C4/5/TE

4 x 5 Amp dimmer pack with IR remote control & brushed stainless steel control plate.

MSD/C4/5/TE

4 x 5 Amp dimmer pack with IR remote control & polished brass control plate.