The Lightlink compact dimmer pack has been developed to provide a range of budget power handling packs whilst incorporating the flexibility and performance of the Lightlink scene-setting software. A seamless bi-directional link to most third party systems via an open protocol is available as an option.

The packs are available in seven configurations and accept a single-phase supply with power handled by substantial SCR's with high speed fuse protection. Power distribution is incorporated to provide input power isolation and output circuit MCB protection. Click here to view our latest edition

FEATURES

• Controls Tungsten, Low Voltage, Cold Cathode and fluorescent
  (2 wire, 1-10V DC or DSI) loads
• Each channel rated at 5A (4 and 8 channel, 1-10V DC) or 10A (4 channel). DSI rated at 50 ballasts per channel. 100 Scene non-volatile memory
• Individual output MCB protection
• LightLink RS485 network connection, RS232*, DMX512*, Analog control*, Intelligent/smart interface*
• Electronic protection against microprocessor failure
• “Bypass to full” mode
• Wide choice of standard and special control panels including LCD Touch Screens, Time Clocks, PE Cells, PIR and Infra-Red remote controls
• Fully programmable via infra-red transmitter or 'on plate programming facility'
• Fully configurable functionality via Lightlink Software
• CE Approved

ORDER CODES

MSD/C4/5/PD

4 x 5 Amp dimmer pack

MSD/C8/5/PD

8 x 5 Amp dimmer pack

MSD/C4/10/PD

4 x 10 Amp dimmer pack

MSD/C4/10/DC/PD

4 x 10 Amp 1-10V DC dimmer pack

MSD/C8/5/DC/PD

8 x 5 Amp 1-10V DC dimmer pack

MSD/C8/10/DSI/PD

8 channel DSI outputs

MSD/C4+4/5/PD

4 x 5 Amp + 4 x 5 Amp 1- 10V DC or DSI outputs

MSD/C8/5/TE

4 x 5 Amp Trailing Edge